Focus RS Forum banner

Indicators and hazards not working

4.1K views 10 replies 3 participants last post by  CliveRS  
#1 · (Edited by Moderator)
Was out with some RS friends taking some car photos.

When I got in my car and started driving home with my sunglasses 😎 I noticed my indicators wasnt working on the dash clock display.

I got home and tried the hazard switch and nothing on the dash display and nothing when I got out of the car front or rear.

When using the indicators stalk nothing.

I'm guessing the fuse is at the back of the glove box.

Is the hazard and indicators on the same fuse?

But when I lock the car all indicators flash outside of the car so not a bulb issue.

Thanks people 👍🏻
 
Discussion starter · #4 ·
There's no flasher relay Clive, so first thing I'd check is all the connections at the BDM module in the passenger footwell.

@CliveRS
ps. I've merged your threads on this issue.
Just had a quick look at the fuse box in the car.
Checked all the plug connections into the fuse board and all looks ok.

Can anyone put me in the right direction to where I can find the flasher relay as I couldn't see and relay when I had a quick look under the glove box.
 
Discussion starter · #6 ·
Discussion starter · #7 ·
Right people it's sorted.

Andy was right all along

I was just being a numpty

One plug on the far left of the fuse board was loose and the black clip in the open position.

Hazards and indicators working again