I went to empty my Radium PCV catch can today, for the first time since it was installed in July 2020 when Dreamscience forged my engine, I unscrewed the dipstick on top of the can and it is completely bone dry, not even a film of oil on it, got a torch down the dipstick hole and not a drop of oil in there 
Now I know I haven't done as many miles as usual this past year since the install (approx 5k), but there should still be some in there, the breather plate can't be that effective
Anyone with any ideas what could be going on? I can't imagine dreamscience would have fitted this wrong, seeing as they've done countless engine builds and surely catch can installs. I've had a feel around and the chunky rubber hose that leaves the left side of the catch can is routed under the manifold and connects onto a hard pipe which I lose track of under the manifold, it can't be connected to anything else can it 😆
Now I know I haven't done as many miles as usual this past year since the install (approx 5k), but there should still be some in there, the breather plate can't be that effective
Anyone with any ideas what could be going on? I can't imagine dreamscience would have fitted this wrong, seeing as they've done countless engine builds and surely catch can installs. I've had a feel around and the chunky rubber hose that leaves the left side of the catch can is routed under the manifold and connects onto a hard pipe which I lose track of under the manifold, it can't be connected to anything else can it 😆
