Focus RS Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
10,334 Posts
I had a Mountune X4 kit on my old Mk2 but a lot of people did just do their own cutting and run a cold air feed to the bumper to save £££ :) (y)
 

·
Registered
MK2 MR420 Clubsport
Joined
·
744 Posts
And to fit the cold air feed, bumper off ?
Bumper doesn't need to be removed, the triangle piece can be removed separately from the bumper - from what I know the clips used to hold the piece in place can be tricky to undo without breaking them, so maybe best to have a few new ones ready before doing the work just in case (y)

Simon
 

·
Registered
Joined
·
908 Posts
Bumper doesn't need to be removed, the triangle piece can be removed separately from the bumper - from what I know the clips used to hold the piece in place can be tricky to undo without breaking them, so maybe best to have a few new ones ready before doing the work just in case (y)

Simon
can you still buy those clips ?
and does anyone have a part number for them
 

·
Registered
Joined
·
13,480 Posts
I had Mountune X4 fitted and it was easy just have to remove the under tray and there is plenty of room to fit it. Its a bit of a squeeze if you have a Spec-r intercooler and hard pipe kit though.
 
1 - 13 of 13 Posts
Top