Focus RS Forum banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
77 Posts
Discussion Starter · #1 · (Edited)
Hi all

Changed my abs cables about 3 years ago, same issue has come back, looking to change them again, my car is 09 so had to solder the new ones in. Does anyone have a link to what plug I need to solder into my loom to make them easier to change?

Thanks!
 

·
Registered
Joined
·
119 Posts
If you're willing to look around a scrap yard the plug/socket was used on a MK6 Escort, that's what we used on mine. I was lucky that the garage that repaired my car had all sorts of spare looms just for this cases like this because Ford plugs/sockets are very difficult to source on their own.

Alternatively have a look on;


A friend and I are working on a plug in modern replacement for the reversing camera and we used this site to find the connectors Ford used.
 

·
Premium Member
Joined
·
13,308 Posts
Are you sure its the ABS cables. I had a similar problem with codes and turned out to be a corroded sensor connector at the wheel.
 
1 - 4 of 4 Posts
Top