Focus RS Forum banner

Managed to get a Full Valet done on the RS

1K views 19 replies 14 participants last post by  VRJ110 
#1 · (Edited by Moderator)
I spent about 7 hours valeting the Focus RS last week but only just got round to sorting the photos out. I wish id got it out of the workshop and the shadows to get a decent pic afterwards but sadly it rained!! I did do the wheels at the end hence why they are dirty in some of the pics.

c053fc13-1398-4daa-aa20-3e7b1b4ccd0d_zps
WP_20150507_13_49_36_Pro_zps1qtm7eyn.jpg
WP_20150507_13_49_22_Pro_zpstrxgem1g.jpg
WP_20150507_13_49_14_Pro_zpse29oxk9u.jpg
 
See less See more
4
#7 ·
Luckily a mate has a workshop so I can go up and wash it outside then role it in to polish it. I wish id put another layer of wax on now but gonna give it another go over soon. It was a 3 stage polish using meguires.

So first off I used a valet pro snowfoam

Followed by a wash with Valet Pro Poseidan wash

Then clayed with G3 clay mitt and used valet pro tar and glue remover for tougher tar spots

Then 1 coat Meguiars Ultimate Compound

1 coat Meguiars Ultimate Polish

1 coat Meguiars Ultimate Wax

It was the first proper valet ive ever done and took me about 7 and half hours by hand but the results were worth the effort big time. Going to do it again Thursday or Friday and hope the weather stays off this time for the trip home.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top